HVAC Company Business BrokerBook a call
Menu
HedgeStone Business Advisors
Definition

Consumer financing attach rate on HVAC jobs

Consumer financing attach rate measures the share of eligible HVAC jobs funded through a defined customer financing program. Offers, approvals and funding are separate events. Compare a count-based rate with financed sales dollars and inspect dealer fees, cancellation rights and payout timing before valuing a financing-dependent sales process.

Consumer financing attach rate is the proportion of eligible HVAC sales that use a defined customer financing program, measured by jobs or dollars at a specified stage such as funding.

What exactly is attached to the sale?

A contractor might offer a homeowner several ways to pay for a replacement system. The homeowner can pay cash, use a personal credit card, arrange independent financing or apply through the contractor’s participating lender. Define whether the metric covers only the dealer-arranged program or all externally financed purchases. Most contractors can verify funding for their own program. They may have little reliable information about a customer’s independently arranged credit.

Choose the event that counts. An offer presented by a comfort adviser, an application submitted by the homeowner, a credit approval, signed loan documents and a funded installation all represent different stages. A high application rate says little about cash if approvals expire or customers withdraw. For historical job economics, start with funded sales and preserve the earlier events so you can diagnose why potential loans did not fund.

Define the eligible sale population. A $160 repair and a $16,000 heat pump installation may have different financing availability and customer demand. Counting every small repair in the denominator can make an installation-focused program appear underused. If the business excludes low-price jobs, document the price threshold, eligible equipment and product rules. Preserve a second company-wide measure when the buyer needs to understand reliance on that lender.

What does a complete financing funnel show?

Track the original job identifier, estimate amount, eligible plan type, offer date, application status, approval, completion and settlement. Link reversals, partial funding and refunds to the same job. In an early data room, use anonymized job identifiers and aggregate credit outcomes. The buyer needs verified operating economics and should avoid collecting unnecessary customer credit applications or personal financial information.

ServiceTitan documents contractor financing workflows, while the Consumer Financial Protection Bureau publishes Regulation Z disclosure requirements for covered credit transactions. The precise obligations depend on the transaction, product and roles of the dealer and lender. Ask qualified counsel and the program provider about the actual advertising, documentation and disclosure setup before relying on a script or promotional payment presented to customers.

How can one quarter support two different attach rates?

Illustrative composite — not a real client. A branch completes 84 eligible replacement installations worth a combined $924,000. Salespeople present dealer financing on 70 jobs. Thirty-six customers apply, 31 receive an approval and 27 installations ultimately fund through the program. The 27 funded jobs represent $351,000 of gross invoiced revenue. All funded dollars relate to those completed installations.

Offer, funding and dollar shares across 84 eligible installations
RateCalculationResult
Financing offers per eligible job70 ÷ 8483.3%
Funded jobs per eligible job27 ÷ 8432.1%
Financed dollars per eligible sales dollars$351,000 ÷ $924,00038.0%
Approved applications that funded27 ÷ 3187.1%

The funded jobs carry larger-than-average invoices, so the dollar share exceeds the job share. At a hypothetical 6% dealer fee, the provider withholds $21,060, leaving $329,940 of net settlement before any other adjustments. If the program fee rises to 8% on the same volume, the additional expense is $7,020. A forecast that increases sales while ignoring this fee change overstates the contribution available for overhead.

Where does funding disappear between approval and payment?

Review expired approvals, incomplete work, missing customer acceptance, change orders and partial loan amounts. A homeowner approved for $12,000 might sign a $14,000 installation that requires a separate down payment. Record both funding sources and reconcile them to the final invoice. Counting the full invoice as lender-funded can overstate the amount subject to dealer fees and obscure cash still owed by the customer.

Timing matters around closing. A June installation may fund in July after the lender reviews completion documents. Identify whether the receivable transfers to the buyer and who owns the subsequent deposit. Reconcile settlement deposits net of fees to gross invoices and record any reserves or chargebacks under the program terms. A payment delay can affect opening working capital even when the job itself earns an adequate gross margin.

Does higher attachment increase profitability?

Test realized contribution by payment method, equipment tier and adviser. Customers using financing may choose more expensive equipment, but the difference could reflect system size, household needs or an adviser specializing in larger projects. For your analysis, compare similar jobs and account for dealer fees, discounts, labor and added customer benefits. Do not attribute the entire difference in invoice value to the financing program without supporting evidence.

Model an interruption in program availability. Determine which customers could reasonably use another provider and whether that provider charges comparable fees or has similar approval and funding requirements. A seller’s approval as a participating dealer may require a new application after ownership changes. Obtain written guidance on continuation, outstanding applications and the settlement bank account. A buyer should know how it will complete jobs already sold using the old program.

How can you compare a promotional plan with the standard lender option?

Start with the customer’s equipment and installation scope, then follow the contractor’s complete settlement for each finance product. A promotional offer with a lower customer payment can carry a different dealer fee or merchant cost. A contractor may accept that cost to improve conversion or sell a different system. Your comparison should determine whether the extra completed contribution covers the fee difference.

Suppose two plans could finance the same $12,000 installation. Under illustrative dealer fees of 4% and 8%, the contractor would give up an additional $480 to use the higher-fee plan. If the customer would have bought the same system under either plan, that $480 reduces job contribution before any other changes. If the second plan enables a sale that would otherwise be lost, compare its actual after-fee contribution with the realistic alternative, including a repair or delayed purchase.

Track selection effects before drawing conclusions. Advisers may present promotional financing mainly on expensive systems or to customers who have already said they will not proceed at the standard payment. A simple average invoice comparison will blend those differences. Review similar job scopes, lead sources and adviser assignments, and ask your sales manager why each option was presented.

What should you check when one provider funds most of the jobs?

Measure concentration in both funded job count and funded dollars. A lender may finance many small installations while a second provider funds a handful of premium systems. Identify the products, credit decisions, equipment categories and customer groups each provider serves. Once you know what would be interrupted, examine whether an alternative provider can serve those specific jobs under its actual terms.

Review the dealer agreement’s termination, ownership-change, reserve, recourse and documentation provisions with counsel. A contract can authorize reserves or reversals under stated conditions. A settlement received today may still be subject to a later dispute. Quantify outstanding unfunded balances and unresolved customer issues rather than assuming the entire historical funded volume will transfer without interruption.

Ask the provider which steps a new entity must complete and when the buyer can test them. A backup lender installed in software does not establish that it will fund the same customer, offer the same payment or settle on the same timetable. Your continuity plan should name an approved contact, expected processing date and the employee responsible for exceptions.

How do you reconcile partial financing and multiple settlements?

Use one row per financing contract and link it to the job, final invoice and bank settlement. Record the financed principal, customer down payment, dealer fee, any holdback and amounts funded in stages. If a job requires two disbursements, the company has one financed job and two settlement events. Counting each event as a separate financed installation inflates the attach rate.

Compare month-end outstanding receivables with subsequent deposits. Investigate a job marked funded in the sales dashboard when no money reached the business account. It may be a routine timing difference, an application that never completed, an amount deposited into the seller’s bank account or a rejected completion certificate. Your deal team can then assign a specific action and distinguish a cash delay from a permanent loss.

What belongs in transaction diligence?

Ask your team to obtain dealer agreements, fee schedules by product, monthly settlements, cancellations, job-level exports and any change-of-control correspondence. Record who trains comfort advisers, maintains approved financing materials and handles disputes. Check whether a favorable fee depends on annual funded volume. A change in lender mix or contractor volume can move the effective rate even when individual plan fees remain constant.

You can use the buyer diligence checklist to assign outstanding lender approvals and audit a sample of large financed installations. Review replacement conversion to connect applications to completed jobs. When forecasting paid leads, the marketing efficiency calculator can use contribution after dealer fees so the acquisition budget reflects the actual margin generated by those installations.

Finally, follow the first settlement batch under new ownership. Confirm that the provider deposits funds into the correct business account, deducts the contracted fees and attaches the expected job identifiers. An approval letter and a successful test application establish less than a reconciled settlement from a properly completed customer job. In your working papers, keep the signed transfer instructions, lender contact and exception log accessible to the employees who handle collections.

Compare the length of time from job completion to funding for several lenders and product types. A provider offering a lower fee may release payment more slowly or require additional completion documentation. Calculate the cash tied up over a busy installation week and confirm who handles exceptions before assuming two programs are operationally interchangeable.

When you review your dealer agreement, identify the person at your provider who can resolve an unfunded job. Ask your adviser to show you the final customer acceptance step and your bookkeeper to show you the resulting net deposit. That sequence tests whether your team can turn an approval into usable cash.

Where can you go next?

What else should you know?

Should an approved application count in the attach rate?

You can report an approval-based metric if you label it precisely. For realized job economics, calculate a funded-job rate and track approvals separately. Approved customers may cancel, change suppliers or need a different loan amount before installation and final lender settlement.

What is the difference between job share and dollar share?

Job share divides funded jobs by eligible jobs. Dollar share divides financed dollars or financed-job revenue, under a defined policy, by eligible sales dollars. The two diverge when financed jobs have different typical invoice amounts or customers make substantial down payments.

Do dealer fees reduce the job’s economics?

Include the program’s fees in the contribution analysis and reconcile them to the settlement record. Confirm the accounting presentation with your accountant so the same deduction is not counted twice. Compare net economics across financing products because promotional plans can carry different charges.

Will the program automatically continue after closing?

Check the actual dealer agreement and get instructions from the provider for the transaction structure. A new entity, ownership change or bank-account change can require review. Track pending applications, unfunded jobs and settlement rights so ongoing installations have a documented payment route.

Which sources informed this page?

Explore the operations hub