Does a wider service menu automatically create a stronger company?
No. Additional trades add value when they produce durable earnings or measurable efficiencies that continue under the buyer. Look beyond the list of services on the trucks. Ask which work orders the company actually completes, which staff are qualified to perform them and how often customers buy more than one trade at a profitable price. A business can have three trade names and only one reliable operating engine.
Start the comparison by choosing a common period and a consistent set of earnings definitions. Separate the effect of company size from the effect of its mix. A larger multi-trade business can produce more total dollars but weaker margins or greater management dependence. An HVAC specialist can be highly profitable while depending heavily on a single local distributor or owner-salesperson. Identify the operating risk behind each reported profit figure before assigning a diversification premium.
What should you put in a trade-by-trade comparison?
Use an operating scorecard with a common ledger reconciliation, then add evidence specific to each trade. Revenue per technician may be calculated similarly across the organization while the job types, hours, material content and ticket sizes differ. ServiceTitan’s field KPI guidance and benchmark documentation distinguish categories of work and comparable business groups. Apply useful definitions without assuming an HVAC replacement target is an appropriate benchmark for an electrical troubleshooting call.
| Criterion | HVAC-only company | HVAC, plumbing and electrical |
|---|---|---|
| What drives demand | Repairs, maintenance, replacements and new installations respond to the local HVAC market and weather. | Individual lines can have different call patterns, seasonality and sources of customer acquisition. |
| Margin evidence | Separate service, replacement, contract and project work to understand one trade in detail. | Reconcile every trade’s job revenue and direct costs to the company ledger before allocating shared overhead. |
| Technician capacity | Check diagnostic depth, installation capacity, after-hours coverage and lead generation inside the HVAC workforce. | Assess qualifications, supervision, pay plans and coverage separately; an idle technician in one trade may not fill a shortage in another. |
| Licensing | Document the contracting entity, qualifier, jurisdictions and individual refrigerant credentials that apply to the work. | Map each trade to its own licenses, qualifying people and post-closing approvals across all relevant jurisdictions. |
| Customer relationship | A strong specialist can earn repeat service and replacement calls in a defined service territory. | Overlapping addresses can create cross-selling opportunities, subject to permissions, conversion and delivery capacity. |
| Operating systems | A single price book or CRM may still require separate workflows for installation and service. | Shared customer records must distinguish trade ownership, pricing, callbacks, commissions and source attribution. |
| Management after sale | Price the seller’s sales, field and qualifying responsibilities in a realistic replacement role. | A general manager may also need licensed trade leads, estimators or separate dispatch supervisors. |
| Risk concentration | One trade can be exposed to equipment cycles, weather, key staff or one advertising channel. | A wider catalog can reduce some demand risks while creating simultaneous dependence on the same owner or marketing channel. |
If you are selling, explain why an internal allocation is used and show the unallocated total as a check. If you are buying, focus first on direct contribution by trade and then identify the shared expenses that must continue. An internal profit center can look weak because it carries unusually high rent or dispatch allocation. Removing its revenue without removing the actual shared costs would make the combined business worse.
How do comparable earnings change after pricing the owner’s job?
Pricing management at its continuing cost leaves $415,000 of modeled adjusted EBITDA at the HVAC-only company and $545,000 at the multi-trade company. Inspect the responsibilities behind each replacement budget before interpreting the difference.
An HVAC specialist reports $285,000 in after-tax profit. Entity tax is $22,000, interest is $28,000 and depreciation is $65,000, giving $400,000 of book EBITDA. Add $146,000 of expensed owner pay, $4,000 of supported personal expense and a $10,000 isolated charge. Working-owner SDE is $560,000. A fully loaded $145,000 budget covers continuing management, so adjusted EBITDA is $415,000.
A multi-trade target reports $420,000 of after-tax profit. Adding $32,000 of tax, $48,000 of interest and $90,000 of depreciation produces $590,000 of book EBITDA. Add $190,000 of owner compensation, $8,000 of substantiated personal costs and a $12,000 isolated item to get $800,000 SDE. The buyer needs $255,000 of continuing management and trade supervision, leaving $545,000 of adjusted EBITDA. Although the working-owner earnings difference is $240,000, the manager-run difference is $130,000. The extra $115,000 of hoped-for cost savings entered in the multi-trade tool stays outside historical earnings.
Test the specialist’s earnings bridge · Test the multi-trade earnings bridge
Which common costs can you actually share?
Inspect one week of dispatch. Determine whether the office can handle calls across trades using a single scheduler or whether technical triage requires specialist assistance. A common billing office can reduce duplicate administration, while one overloaded dispatcher can create missed calls across the whole company. Verify expense savings against headcount, hours and the cost of retaining anyone who will take on more responsibility after the sale.
Examine service vehicles and warehouse stock in the same way. A shared facility may lower rent per dollar of revenue, but each trade can still need specialized tools, insurance and inventory. Adding an electrical division might also require different supervision and permit administration. Review the technician roster and productivity tracker with the operations manager. Mark the person who can legally and practically take over each category of work, and identify any role that would become empty if the proposed successor moved to management.
How do you test cross-selling without counting the same sale twice?
Select a cohort of households that used HVAC service and had no open plumbing or electrical job at the beginning of the period. Trace subsequent referrals, booked appointments, completed work and cash collected in each other trade. Calculate the incremental direct margin and subtract any referral commissions, marketing or extra dispatch cost. A shared customer record helps you measure the opportunity, but an address in the CRM is not revenue until work is sold and performed.
Suppose 150 eligible households receive a plumbing introduction, 30 book and 18 purchase work contributing $180 gross profit each. The gross contribution is $3,240 before referral and administration costs. If the company pays $900 in incremental campaign expense, $2,340 remains before shared overhead. A presentation that multiplies all 150 households by a typical plumbing ticket would vastly exceed the evidence. Run the same test in the opposite direction because plumbing-to-HVAC replacement behavior need not resemble HVAC-to-plumbing repair behavior.
Why should licensing and technical oversight be underwritten separately?
Different trades can be subject to different state or local licensing and supervision requirements. One person may cover several categories only if the applicable authorities permit it and the person can perform the actual duties. Obtain the legal entity name, license class, qualifying individual and jurisdiction for each activity. Identify who will hold the required role after the ownership change and when approvals must be obtained.
EPA Section 608 certification applies to individuals performing covered work with refrigerants. It does not establish a person’s right to qualify an electrical contractor, run a plumbing operation or meet every HVAC contractor licensing requirement. A seasoned HVAC manager can be highly effective without holding all the unrelated qualifications the combined business may need. Price and schedule any separate coverage before counting the company’s full cross-trade earnings in your acquisition forecast.
Which model fits the buyer’s operating skills?
Decide how many independent operating problems you can solve at once. A first-time buyer with strength in one trade may still acquire a multi-trade company if experienced supervisors remain in place on credible terms. An established regional operator might be able to share staff functions across locations but still need a licensed local lead for each trade. The most valuable capabilities are those the buyer can retain without damaging service quality.
Choose an HVAC-only company if…
You understand the local service and replacement opportunity, can retain the relevant technical coverage and have a defensible plan for seasonality. A focused operator with clean service metrics can be easier to manage and compare when the purchase price gives appropriate credit to its actual earnings.
Choose a multi-trade company if…
Each line makes a measurable contribution or you have an explicit, funded turnaround plan. The people and legal authority needed for all trades will remain available. You can verify transferable shared systems and real cross-selling without paying twice for the same household or removing managers the business needs.
- Reconcile sales, direct gross profit and allocated costs for each operating line.
- Recast owner duties after identifying every job that requires continuing coverage.
- Sample actual cross-sold work and measure contribution after incremental expense.
- Compare price and financing with a case in which no buyer-only savings materialize.
The regional HVAC and plumbing acquisition example follows a separate two-trade transaction from financial statements to closing cash. Use that logic to negotiate for strategic value without promising that a future buyer can integrate three service lines at no additional cost.
How can a buyer verify the shared brand’s value?
Look for documented customer behavior rather than assuming the same name on three vehicles creates a cross-sale. Check whether callers know the company performs the other trades, whether the office has permission to contact them and whether the receiving trade can book the work when needed. Review refunds and callbacks on cross-sold jobs as well as initial ticket size. A poor experience in one trade can influence demand for the rest of the business.
If you operate several trades, ask your managers to price one week without your help. Which quotes reach your desk, which permits need your signature and who handles your callbacks? Put those duties into your replacement budget before you compare the bids.
Where can you go next?
What else should you know?
Should plumbing and electrical be valued on the same multiple as HVAC?
First determine what each line earns and whether it can operate independently. Comparable businesses should match size, work mix, customer risks and management coverage where possible. A provisional HVAC reference may inform a majority-HVAC company, but it does not establish a single multiple for every trade in the group.
Can the owner’s multiple licenses all transfer to the buyer?
Identify the licensing authority, legal entity and qualifying individual for each trade and jurisdiction. Ownership changes and qualifying-person changes can have different consequences. Review the actual qualifications, employment arrangements and filings with counsel and the issuing authorities before assuming the buyer can continue every service immediately.
What if one trade makes little profit but feeds leads to another?
Measure those leads through booked, completed and collected jobs, then calculate incremental contribution after referral and delivery costs. A strategically useful trade can justify its place, but it needs evidence. Compare the combined outcome with the cost of obtaining those same customers through another channel.
How do I allocate dispatch costs fairly?
Choose a supportable driver such as handled calls, scheduling time or workload by trade, and show how sensitive the results are to a different allocation. Keep the combined office cost reconciled to the books. Before cutting the cost, identify exactly which work and staffing would disappear.
Which sources informed this page?
- Home Services M&A Multiples Report · CT Acquisitions, April 1, 2026
- Contractor Playbook, residential field staff KPIs · ServiceTitan, November 21, 2026
- How the industry benchmark report groups companies · ServiceTitan, November 21, 2026
- Section 608 technician certification requirements · U.S. Environmental Protection Agency, November 21, 2026
- Glossary of business brokerage terms · International Business Brokers Association, November 21, 2026
