Flat-rate pricing is an HVAC pricing method in which the contractor quotes a stated amount for a defined task or scope before performing the work.
What does the quoted amount include?
Read the customer-facing description and the internal pricebook entry together. A capacitor replacement might include diagnosis, the specified part, installation, system testing and a stated workmanship warranty. Another contractor may bill the diagnostic visit separately or waive it only when the customer approves the repair. Two entries carrying the same repair name can therefore produce different total invoices and different customer expectations.
Define the boundary of the task. A technician replacing an accessible component on a residential unit faces a different scope from a rooftop repair requiring a lift, helper or special access permission. If the scope changes, record the reason, revised price and customer authorization under the company’s procedures. Otherwise a job-cost review cannot distinguish a weak price from work the technician performed without charging for it.
ServiceTitan’s pricebook documentation explains how contractors maintain and customize items. The software can store planned labor, material and price assumptions. Those settings describe the company’s plan. You need timecards, vendor invoices and completed job records to establish what actually happened in the field. Preserve dated pricebook versions so last year’s invoices can be compared to the prices technicians were using at the time.
How is an internal price built?
Start your review with the expected direct cost for a defined repair. Include the part, freight or trip costs you treat as direct, fully burdened field labor and any helper or specialty equipment. Then choose the intended gross margin using your company’s cost classification. For a target margin expressed as a percentage of price, divide direct cost by one minus the target margin. Markup on cost uses a different denominator.
For example, a repair with $180 of direct cost and a target 40% gross margin requires a $300 price. Adding 40% to cost would produce $252 and a gross margin of approximately 28.6%. Neither calculation pays overhead by itself. Determine which costs already sit in job cost and which the resulting gross profit must still cover. Applying a labor burden rate that already includes a portion of overhead can make comparisons with another shop misleading.
How much can a small time difference cost?
Illustrative composite — not a real client. A contractor charges $460 for a standard repair. The pricebook allows $105 for parts and 1.25 field hours at $68 per hour in direct employment cost. A fixed $18 travel and consumables allowance brings expected direct cost to $208. The estimate implies $252 of gross profit, or approximately 54.8% of price.
| Scenario | Direct cost | Gross profit |
|---|---|---|
| Pricebook allowance | $208.00 | $252.00 |
| Actual 1.75 hours and $122 part | $259.00 | $201.00 |
| Same actual cost with a 10% member discount | $259.00 | $155.00 |
At the actual labor and parts cost, the full-price job’s margin falls to about 43.7%. After the discount, the customer pays $414 and margin falls to about 37.4%. If 80 similar discounted jobs occur in a quarter, their aggregate gross profit is $12,400 under the stated assumptions. A buyer using the pricebook’s undiscounted $252 estimate would forecast $20,160, overstating contribution by $7,760.
How should you sample realized prices?
Choose frequently sold tasks and a selection of unusual or costly jobs. For each item pull the original task code, applicable pricebook date, customer agreement, posted invoice, employee time and part usage. Compare the stated flat price with the actual net charge after membership discounts, discretionary discounts, credits and waived fees. A nominal price increase can have little effect if technicians routinely reduce it to keep sales.
Analyze the distribution of labor time. A few difficult jobs can consume enough time to offset the gains on many quick repairs. Inspect access conditions, customer location, equipment age, parts availability and technician training before altering prices. A permanent regional cost difference may justify a separate task or territory rule. An isolated error may call for training or a purchasing correction instead.
What happens to warranty and callback costs?
Link a return visit to the original repair even when the customer receives a zero-dollar invoice. Record actual labor, travel and materials and separately record supplier reimbursement when supported. A parts warranty may replace the component while leaving the contractor responsible for labor and another trip. If you inspect only the first invoice, the original repair can appear more profitable than the complete obligation.
Ask how supervisors approve complimentary work and who can override prices. A technician may need authority to resolve a customer issue quickly, but the company should be able to explain the economics afterward. Compare overrides by task, territory and plan type. Determine whether old members retain fixed prices that conflict with a recent pricebook update. That finding affects both the service department and the economics of the membership book.
How do you separate price increases from repairs that changed scope?
Maintain a dated record for frequently used task codes. If the company changes both the price and what the technician installs, a comparison across years can misstate pricing power. A repair that formerly included one component may now include a kit, extended warranty or second visit. Compare the customer description, actual parts and expected labor before calling every change in price a margin improvement.
Select several jobs at the old price and several at the new price. Match scope and system accessibility as closely as practical. Note whether the company also changed the diagnostic charge, membership discount or minimum invoice. Your customer may pay the same total even if one task price increased because another charge disappeared. Follow the complete customer invoice through credits and refunds.
Estimate the impact on accepted work. If a shop raises a task from $350 to $390 while direct cost remains $210, expected contribution per accepted job grows from $140 to $180. Forty old-price jobs generated $5,600 of contribution. It takes slightly more than 31 new-price jobs to match that total at the assumed cost. Once you include actual conversion and staffing, you can judge how much lost volume the increase can absorb.
How should a contractor price an unusual access condition?
First identify whether the condition is already part of the task’s ordinary scope. Access to a rooftop, parking restrictions, an electrical isolation requirement or a second person for safe handling can change the resources needed. Ask your technical supervisor to review manufacturer and site requirements and estimate the actual field hours and equipment. Written scope and approval reduce disputes later.
For repeat conditions, consider whether the pricebook should contain a separate task or documented modifier. For unusual work, an individually reviewed estimate may be more appropriate. Compare the customer-facing description with what your technicians are trained and authorized to perform. A vague extra charge can frustrate a customer even when the company correctly identified higher delivery cost.
Ask who approves exceptions and how they appear in job costing. A salesperson who routinely waives an access modifier may generate attractive signed tickets while the field team absorbs unpriced labor. If the buyer expects to enforce the modifier after closing, test whether recent customers accepted it and whether the new approval process will delay service.
How does a pricebook become part of the business transfer?
Verify ownership and access. The seller may use a licensed vendor library, a custom workbook, an equipment distributor feed or task descriptions written by the owner. Determine what the buyer can legally transfer or continue subscribing to, which employee can edit values and whether the software records effective dates. Recovering prices from past invoices is more difficult than receiving the actual maintained schedule.
Test a routine update before closing. Ask your designated successor to change a known supplier cost in a controlled example, verify the resulting task price and check the displayed customer estimate. Confirm that membership discounts still apply as intended and that historical invoices retain the prices previously agreed. Those practical checks tell you whether the pricing system can continue without the seller’s personal intervention.
How does pricing translate into a purchase decision?
Build separate scenarios for existing realized prices, approved changes already showing up on invoices and proposed future increases. You can use the productivity calculator to connect completed work to field capacity. Review average ticket before assuming a higher blended invoice proves an increase in price. A summer with more major repairs can raise average ticket while each pricebook item stays unchanged.
Ask your team to obtain a list of employees who maintain the pricebook, the software subscription and the process for adding newly sourced equipment. If the departing owner manually updates prices each time a vendor changes rates, determine who will take over. Document the access transfer, vendor price feeds and review calendar in the buyer diligence checklist. Test whether the incoming manager can revise one existing task and issue an accurate estimate before relying on a planned company-wide price increase.
Finally, ask technicians to walk through several recent exceptions. Which repairs consistently need a second person? Where did travel exceed the allowance? Did parts availability cause a second trip the customer would never reasonably expect to fund? Their answers can turn a broad disagreement about pricebook margin into a specific operating plan and a cash forecast supported by completed work.
Ask for the approval record behind changes to the ten most frequently sold repairs. A dated note from purchasing can explain a sudden component cost increase, while a dispatch change can explain improved travel time on the same task. Retain both pieces of evidence so the incoming service manager can distinguish a deliberate price decision from a temporary vendor promotion.
Before you issue a revised pricebook, ask your lead technician to cost one common repair from start to finish. Compare the estimate with your last ten completed jobs and your actual parts invoices. You then have a documented reason to change a task or its quoted price.
Where can you go next?
What else should you know?
Does flat rate mean unlimited work for one price?
The quote covers its defined scope and written terms. Document material changes, obtain any required authorization and preserve the revised estimate. Review disputed jobs with the actual customer agreement and applicable requirements. A vague task description can create both margin and customer-service problems.
Is a 40 percent markup a 40 percent margin?
Markup divides gross profit by direct cost. Margin divides gross profit by selling price. A $100 cost sold for $140 has a 40 percent markup and about a 28.6 percent margin. Use the same denominator when comparing a seller’s pricebook with reported job profitability.
Why do similar tasks have different realized margins?
Actual technician time, travel, parts cost, discounts and follow-up service can differ even when the quoted price is identical. Trace individual jobs back to the version of the pricebook in use and group comparable access conditions before changing the task or evaluating technicians.
Can I assume a newly updated pricebook increases EBITDA?
Test whether customers actually pay the new price, whether volume changes and whether direct costs also rise. Completed invoices and realized contribution provide stronger support than a draft pricebook. Keep a proposed increase separate from historical earnings until evidence supports its effect.
Which sources informed this page?
- Customize pricebook items and pricing · ServiceTitan, November 21, 2026
- Dashboard business metrics and denominator definitions · ServiceTitan, November 21, 2026
- Contractor Playbook, residential field staff KPIs · ServiceTitan, November 21, 2026