HVAC Company Business BrokerBook a call
Menu
HedgeStone Business Advisors
Guide

Counting obsolete HVAC stock before you agree on a price

Count the physical items, establish who owns them and assign each a supported use or exit. A sealed component that fits an active job can justify a different amount from the same component with missing documents or no compatible equipment. Reconcile usable stock and disposal costs to the agreed closing mechanism.

Shelves of boxed legacy HVAC parts and a removed condenser coil separated for a physical count.

Which stock will a buyer actually be able to use?

Value each material item according to ownership, condition, compatibility, lawful intended use and an evidenced route to recovery. Your warehouse ledger tells you what the shop originally recorded. It does not establish that today’s buyer can install the equipment, return it for cash or move it at the current asking price.

Walk the shop with the service manager. A sealed control board ordered for a common system may turn regularly. Another board in identical packaging might have been ordered for a one-off commercial job that was canceled two years ago. A third box may hold the failed board that a technician put in the replacement’s packaging. All three can appear under one inventory description. Each belongs in a different negotiation.

When you prepare your warehouse list, give every expensive item a unique identifier before discussing a percentage haircut. Record the full model, serial number if applicable, location, box condition and source invoice. Identify whose name appears on the invoice and whether a property owner paid specifically for that item. Ask whether any stock is on consignment or already allocated to a job with an outstanding deposit. A count that ignores ownership can make the buyer pay the seller for somebody else’s property.

How should you run the warehouse and van count?

Agree on count timing, cutoff rules and who can witness material exceptions. Capture movements while the count takes place because an operating HVAC shop cannot necessarily stop dispatching trucks. The goal is to distinguish missing stock from stock a technician legitimately took to a customer between the count and closing.

  1. Map the warehouse, service counter, vehicles, rented storage and any equipment held at a distributor.
  2. Number the count sheets and label each area once it has been reviewed.
  3. Record item identifiers and quantities without filling in the expected book quantity first.
  4. Log all receipts, returns, installs and van transfers during the agreed cutoff window.
  5. Reconcile physical quantities to the inventory ledger and investigate large differences in both directions.

Ask your technicians to separate company-owned parts from personal tools, customer components and cores awaiting a supplier credit. A van might hold an expensive motor because tomorrow’s job has already been approved. Trace that motor to the job and determine how its related deposit, completion obligation and final invoice enter the transaction. Counting the motor as free stock while leaving its delivery obligation out of the model can overstate opening working capital.

Four routes from the stockroom to a supported closing value
Proposed routeEvidenceCost to deduct or verify
Current jobCommitted job, specified model and installation dateMissing accessories and remaining fulfillment obligations
Routine service useInstalled base, recent withdrawals and conditionLikely usage period and carrying cost
Distributor returnWritten acceptance for the exact model and quantityHandling, freight, expiry and restrictions on the credit
Resale or removalIndependent bid or disposal estimateTransport, handling and any required specialist work

Select several locations from your warehouse and trace physical items back to the book. Then reverse the test by selecting ledger entries and finding them on the shelves. The first direction catches unrecorded inventory and goods belonging to others. The second catches missing goods and bookkeeping entries that remained after an installation or disposal. Record who explained each difference and retain the supporting job or supplier record.

What makes a matched system or refrigerant issue material?

Establish what equipment combination the buyer plans to install or service and check the applicable documentation for that specific use. AHRI’s directory provides certified performance information. EPA describes restrictions by sector and equipment category. Neither the box label nor a broad statement about a refrigerant transition resolves every component’s practical or regulatory status.

An outdoor unit on the shelf might require a specific indoor coil, controls and configuration to meet the performance promised to a customer. Ask a qualified technical lead to identify the supported combination and save the corresponding manufacturer or certification record. Price any missing components and confirm they can be sourced within the customer’s time frame. If the complete combination costs more than a readily available alternative, historical cost is a weak guide to what the buyer would pay.

Check the intended application and relevant manufacturing, import or installation dates against current rules. Keep a written distinction between servicing an existing system and installing a new system. If the technical lead cannot establish which rule applies, put that stock in an exception group until someone qualified resolves the exact question. A negotiated price can reflect uncertainty without labeling every older component unusable.

Consider the shop’s service territory. Thirty compatible boards for a discontinued model can retain meaningful value if your business services a large installed base and regularly uses them. The same thirty boards may sit indefinitely in a branch that serves different equipment. Compare parts issues over several seasons, including warranty replacements, and check whether your buyer intends to continue serving those customers. Establish a realistic use period before assigning all thirty the same value as the next needed board.

How do you price usable, returnable and stranded inventory?

Estimate recovery from the strongest documented route available to the buyer. Keep gross credits, cash proceeds and avoided future purchases separate. A supplier credit that can only be used on later orders may benefit an established seller differently from a buyer who must open a new account.

Take a hypothetical count of twelve identical parts with an original invoice price of $240 each. Four are committed to signed jobs and supported by current replacement quotes. The distributor agrees in writing to accept five unopened parts at a net credit of $180 each. The remaining three have damaged packaging and no identified buyer. A single $2,880 purchase-cost entry hides three distinct populations. Verify value on the four committed units, record the $900 credit subject to its terms and seek a separate bid for the other three.

Avoid double counting the value of the return. If the seller takes the parts back to the distributor before closing and keeps the credit, remove both items from the transfer schedule. If the buyer receives the goods but the seller’s account receives a future credit, document how the benefit reaches the right party. The guide to supplier terms explains why product price, returns and credit approval can have different answers.

For equipment the buyer declines, obtain a removal plan and cost. A large rooftop unit that nobody wants can still occupy valuable loading space on the first day. Decide who removes it, who authorizes access and who bears damage or disposal cost. Where regulated substances or equipment handling are involved, have an appropriately qualified contractor determine the necessary work. Record the quote date and what it covers before using it as a closing adjustment.

Where does the final count belong in the purchase calculation?

Agree on the accounting and purchase treatment before either side applies the count. Inventory may enter a working-capital calculation, be purchased separately under a schedule or be included in another defined price component. Your closing statement should identify its destination once and explain how a physical count changes it.

Use the buyer diligence workbook to preserve the signed count, exceptions, photos and supplier confirmations. Give counsel and the accountant versions with the same cutoff and identifiers. If a later purchase invoice appears, trace it to received goods and the associated payable. Adding the asset without the liability can distort the adjustment just as much as missing the item itself.

If you are selling, compare the deductions against the deal’s agreed valuation basis. A buyer who plans to standardize on a different brand may choose to exclude otherwise saleable inventory. You may be able to return or retain those items, depending on the contract and practical access. Put the effect into your net proceeds estimate after you account for the time, freight and fees required to realize the value.

If you are buying, revisit the large accepted items after the first inventory cycle. Did the promised jobs consume them? Did the distributor post the agreed credits? Did the service team actually pull the slow-moving spares? Track differences against your original assumptions in the valuation file. A useful closing schedule should also help the purchasing manager decide what to reorder and what to stop buying.

Keep your own copy that remains readable after the seller’s software account closes. A spreadsheet with model numbers, photo references and dated return confirmations lets a new employee resolve a discrepancy without calling the former owner. For high-value exceptions, include a single next action and the person entitled to negotiate with the supplier. A counted quantity becomes an operating asset only when somebody can put it to work or recover its value.

Set an expiry date on your quotes used to resolve a dispute. A liquidation bid valid through Friday does little for a closing scheduled next month unless the buyer can secure the price or renew the quote. Specify who is allowed to accept it and what happens to the proceeds. Where a buyer proposes keeping the stock for later use, ask which purchase order the stock would displace and when that order would otherwise be placed. That question connects a theoretical saving to a date and an actual operating need.

Where can you go next?

What else should you know?

Does unopened HVAC equipment deserve full invoice cost?

Opening the box is only one condition issue. Verify the company owns the equipment, the model is usable in a documented configuration, the item can legally serve its intended application and the shop has a practical use or return route. Use those facts to negotiate the basis and value at closing.

Can service components for older HVAC systems still have value?

Yes. A component may serve an installed customer base even if new system configurations have changed. Check compatibility, condition, recent usage, current regulatory requirements and availability. Estimate how many units the shop could realistically use before assigning the same value to an entire shelf of identical spare parts.

How should we count inventory held in technicians’ vans?

Identify each van and custodian, schedule a count and give the team a cutoff for recording transfers. Check the higher-value parts directly and compare the count with recent usage or replenishment records. Identify personal tools and items committed to a specific customer before carrying any value into the deal.

What if we disagree on the value of a few major items?

Photograph and list each disputed item with its identifiers, ownership evidence, proposed use and competing valuations. Obtain an independent distributor quote, return authorization or specialist opinion where practical. Counsel can document a separate resolution mechanism so a small group of exceptions does not obscure the value of agreed stock.

Which sources informed this page?

Explore the valuation hub