HVAC Company Business BrokerBook a call
Menu
HedgeStone Business Advisors
Example

A $6 million HVAC shop with 45% of revenue from two builders

Two builders generate $2.7 million of this contractor’s $6 million revenue. The purchase works on historical earnings, with roughly 1.33 times coverage. A delay in projects or collections can still leave the buyer short. Follow the recast, contract risks and funding assumptions before paying for the backlog.

Illustrative composite — not a real client

What does the concentration number actually measure?

You are evaluating a contractor that installs residential systems for builders while also doing replacement, service, memberships and existing commercial work. Revenue is $6 million. Two builder groups account for $2.7 million together, or 45%. In the dispatch system their work appears under many subdivision names and job-site addresses. If you rank individual addresses as customers, the company looks less concentrated than it is. Group contracts by the party that awards work and controls payment.

The composite assumes Builder A accounts for $1.65 million and Builder B for $1.05 million. The remaining $3.3 million is spread across other lines. Your first question for each builder is whether future homes are actually under contract, subject to releases, or merely included in a sales forecast. A master agreement can establish pricing without guaranteeing a minimum number of houses. Verify the status before treating a project pipeline as secured future revenue.

How do you reconcile the earnings you are buying?

Work from jobs completed in the same financial period as the tax and payroll entries. Keep progress billings and costs on open sites visible. Construction accounting can recognize work before cash arrives, while replacement customers may pay at installation. Using one year of cash collections as revenue for one line and accrual revenue for another makes the earnings bridge difficult to defend.

Operating earnings bridge for this shop
ItemAmountHow to read it
Annual revenue$6,000,000Both builder groups are consolidated despite multiple job addresses.
After-tax book profit$430,000Accounts reflect completed-period accrual results, subject to WIP review.
Income tax, interest, depreciation$38,000 + $62,000 + $70,000Reconcile the interest and equipment depreciation entries separately.
Working owner compensation$190,000Replaces owner bid review and relationship work in the next line of analysis.
Supported personal and one-time expenses$5,000 + $15,000Invoice support identifies charges that actually disappear.
Working-owner SDE$810,000Operating earnings before hiring the seller’s replacement.
Fully loaded replacement role$180,000Sales, project supervision and change-order responsibility still need coverage.
Adjusted EBITDA$630,000Use this figure for the install-heavy operating comparison.

Reported profit of $430,000 becomes $810,000 of working-owner SDE. Deducting $180,000 of replacement management leaves $630,000 of adjusted EBITDA. The management budget includes bid review, change orders and the field relationships required to keep the builder work. If the seller has underpriced that role, the revision affects annual earnings on every job. The buyer cannot close the gap by assuming the builder will simply call the new owner whenever an installation problem occurs.

Which contracts need a second look?

Pull a representative subdivision from each builder and compare the original bid, award, released lots, installed equipment, approved change orders, invoices, retainage and cash receipts. Select jobs that are complete and jobs still in progress. Determine who must approve changes when the building schedule moves. Crew time lost to an unfinished site can create a real cost even if the contract allows an extension of the completion date.

Look for the party responsible for retesting, commissioning and callbacks after another trade causes damage. Ask whether the builder can move work to another contractor without compensating you for reserved labor or ordered equipment. Confirm how deposits, stored materials and outstanding warranties transfer. Your buyer due-diligence request list can organize the documents, but the central test is whether a person outside the shop can trace the same set of lots from award to collected gross profit.

How does this case choose a value range?

A $6 million revenue figure is insufficient for the platform-ready comparison when adjusted EBITDA is $630,000 and the company remains heavily exposed to installations and founder-led builder sales. CT Acquisitions’ April 2026 buyer playbook gives an illustrative 3.5 to 4.5 times EBITDA tier for an install-heavy, founder-led operator with limited recurring revenue. This composite has $240,000 of fees, only 4% of total sales, and $4.65 million of new construction and residential replacement combined. You select the operating-profile reference for a cross-check and disclose the assumptions.

Value, financing and closing cash in this case
ItemAmountHow to read it
Earnings used$630,000Normalized manager-run results before separate cash-flow deductions.
Range calculation$630,000 × 3.5 to 4.5CT Acquisitions, April 2026 install-heavy operator profile.
Indicated value range$2,205,000 to $2,835,000The profile includes founder dependence and weak contracted fee share.
Negotiated headline$2,560,000Negotiated before the estimated working-capital settlement.
Closing cash after working-capital adjustment$2,360,000Escrow and a negative true-up reduce the initial wire.
Seller cash after debt and fees, before tax$1,945,000The seller still pays debt and transaction expenses.
Debt service coverage1.33×Calculated on historical cash after operating requirements.
Cash left after all modeled debt$127,425Residual cash can deteriorate rapidly if a builder cuts releases.

At $630,000, that reference implies $2.205 million to $2.835 million. A negotiated $2.56 million price is approximately 4.06 times. The buyer agrees to fund $160,000 of escrow, while an estimated $40,000 working-capital shortfall reduces immediate seller proceeds. The seller receives $2.36 million before paying $315,000 of debt and $100,000 of costs, leaving $1.945 million before taxes. Those deductions do not substitute for funding the buyer’s post-closing working capital.

What does a shift away from builders really earn?

The operating case breaks revenue into $550,000 of residential repairs, $1.95 million of residential replacements, $240,000 of membership fees, $2.7 million of construction and $560,000 of existing commercial work. In this composite the observed gross margins are 47%, 38%, 48%, 21% and 32%, respectively. Multiplying each line by its own margin produces about $1.86 million in total gross profit before overhead.

Suppose the company can move $250,000 of annual sales from 21% margin construction to 47% margin repairs. Fixed total revenue and unchanged overhead would increase annual gross profit by $65,000. At a four-times sensitivity you choose, that is $260,000 of possible value. You have not yet bought those repair customers. Check dispatch capacity, marketing cost and the ability of installation crews to perform paid service work. If new advertising consumes most of the incremental margin, revise the earnings case before offering to pay for the improvement.

Why does the historical financing case work?

The buyer funds $2.56 million of price and $360,000 of initial working capital. On the $2.92 million project, a 20% cash injection contributes $584,000 and the modeled senior loan is $2.336 million. A ten-year amortization at an assumed 9.75% produces a monthly payment of roughly $30,548. Other continuing debt costs $20,000 a year. Total annual debt service is approximately $386,575.

Historical cash available after recurring operating needs is $514,000. That allows roughly 1.33 times coverage and leaves about $127,425 after all modeled debt. Compare the result with the initial acquisition screening rules in SBA SOP 50 10 8.1, Appendix 15. Then take the working-capital schedule to the lender. Borrowing enough principal on closing day does not ensure timely access to funds if the bank requires a borrowing base or excludes aged builder receivables.

What if a builder delays work instead of cancelling it?

Keep margin risk and liquidity risk separate. If Builder B cuts purchases by $500,000 for a full year and the lost work would have earned a 21% gross margin, the illustrative gross profit reduction is $105,000 before any change in overhead. Historical cash available for debt would fall to about $409,000 if the gross profit loss flows through. Against the original payments, coverage drops to approximately 1.06 times. The historic case and the downside case lead to very different negotiating positions.

A delayed payment on already completed work has a different pattern. It can leave book earnings intact while the company must still pay sheet metal suppliers, technicians and equipment distributors. List each material receivable, its expected collection date and its eligibility on the line. Use the SBA financing model to test lower historical cash flow separately from the cash bridge required to carry late receivables.

Which conditions would change your purchase decision?

Insist on a documented explanation of backlog, transfer rights and required consents before including the largest builder’s future jobs in the base case. A friendly relationship with a superintendent can be valuable, but ownership of future purchasing decisions may sit at regional procurement. Ask the seller to arrange appropriately timed, confidential introductions when the transaction process permits. Obtain any required written approval from the contracting party with authority to provide it.

  1. Reconcile active releases to current jobs, equipment orders and receivables.
  2. Stress the loss of margin on a smaller project pipeline.
  3. Model collection delay on work already performed without recording the same loss twice.
  4. Set a working-capital peg and funding plan based on the real project cycle.

You might still buy a construction-heavy company at a price and structure that allow for concentration. You might also delay closing until a new phase is released or negotiate contingent payment tied to actual collected gross profit. The useful question is how much you can pay for the business that exists if the builders choose a slower schedule next season.

Run your own numbers

Test your own exposure using your two largest customers and your actual collection dates. A forecast built from annual percentages can overlook a shortfall in one payroll week.

Where can you go next?

What else should you know?

Is a signed builder agreement the same as committed revenue?

Read the scope, release process and minimum purchase requirements. A master agreement can set terms without obligating the builder to award every lot. Match signed releases to actual installed work and collections before treating projected houses as backlog that will support acquisition debt.

Why use a profile-based multiple instead of a size tier?

The shop’s revenue exceeds the small established tier, but its earnings and management do not meet the platform-ready assumptions. The example therefore uses a published install-heavy operating profile as a conditional reference. A better set of comparable closed deals could change both endpoints of the estimate.

Does a builder payment delay always reduce EBITDA?

A collection delay on completed and properly recognized work can hurt cash before it changes earnings. A cancellation or bad debt can have a separate profit effect. Review the underlying facts and model the cash timing and expected margin loss separately so you do not count a single problem twice.

Can repair work replace lost builder revenue immediately?

Only if you can source the calls, assign trained technicians, carry the needed parts and collect profitable invoices. Installation crews and service technicians can require different skills and schedules. Test a pilot territory and measure direct costs before underwriting an immediate shift at the assumed repair margin.

Which sources informed this page?

Explore the buying hub